Renesis 13B Rebuild Parts
The following parts are recommended for all Renesis 13B rebuilds.
| DESCRIPTION | PART NUMBER | QTY | NOTES |
| APEX SEAL – STOCK | N3H1-11-C00J | 6 | Click here for optional Apex Seals & Springs |
| APEX SPRING – INNER | N3H3-11-C04 | 6 | |
| APEX SPRING – OUTER | N3H3-11-C06 | 6 | |
| CORNER SEAL | N3H1-11-C20E | 12 | |
| CORNER SEAL SPRING | N3H1-11-C24B | 12 | |
| SIDE SEAL | N3H1-11-C11C-8H | 12 | |
| SIDE SEAL SPRING | N3H1-11-C17A | 12 | |
| OIL SEAL SET (STEEL) | N3Z1-11-S10A | 4 | 1 set is 1 inner and 1 outer. Needs 4 sets per engine. |
| O-RING – OIL SEAL OUTER | N3H3-11-C37 | 4 | |
| O-RING – OIL SEAL INNER | N3H3-11-C35 | 4 | |
| SPRING – OIL SEAL FRONT INNER | 1011-11-351 | 2 | |
| SPRING – OIL SEAL REAR INNER | 1011-11-361 | 2 | |
| SPRING – OIL SEAL FRONT OUTER | N3H3-11-C43 | 2 | |
| SPRING – OIL SEAL REAR OUTER | N3H3-11-C47 | 2 | |
| CUTOFF SEAL | N3H1-11-C51 | 4 | Between side seal and oil seal. |
| CUTOFF SEAL SPRING | N3H1-11-C55A | 4 | |
| ENGINE GASKET SET | N3Z3-10-S50B* | 1 | *Use N3Z1-10-S50A for A/T |
| O-RING SET | N3Z1-10-S60 | 1 | NOT included with engine gasket set. |
| MAIN SEAL, FRONT | N3A1-10-507 | 1 | |
| MAIN SEAL, REAR | N3H1-10-508 | 1 | |
| PILOT BEARING | N326-11-D03 | 1 | |
| PILOT BEARING SEAL | 1881-11-404A | 1 | |
| OPTIONAL INSTALLS These are all optional parts to install when rebuilding | |||
| DESCRIPTION | PART NUMBER | QTY | NOTES |
| APEX SEAL – CERAMIC 2PC 2mm | 0000-01-9116 | 1 | Comes with precut dual apex seal springs. 6 seals per box |
| ROTOR BEARINGS – STOCK | N3A1-11-B11 | 2 | 3.0mm (-0.005 to -0.010) |
| N3A2-11-B11 | 2 | 3.0mm (0.00 to -0.005) | |
| N3A3-11-B11 | 2 | 3.0mm (+0.005 to 0.000) | |
| 1011-11-111 | 2 | A/T | |
| FRONT ROTOR | N3Z1-11-B10C | 1 | |
| REAR ROTOR | N3Z1-11-B50C |
1 |
|
|
|
|||
| MAIN BEARINGS – STOCK | NF01-10-E04 | 2 | 1.98mm Yellow |
| No standard size. | NF01-10-E05 | 2 | 1.983mm Green |
| NF01-10-E06 | 2 | 1.986mm Brown | |
| NF01-10-E07 | 2 | 1.989mm Black | |
| NF01-10-E08 | 2 | 1.992mm Blue | |
| NF01-10-E22 | 2 | 1.988mm Yellow | |
| NF01-10-E23 | 2 | 1.991mm Green | |
| NF01-10-E24 | 2 | 1.994mm Brown | |
| NF01-10-E25 | 2 | 1.997mm Black | |
| NF01-10-E26 | 2 | 2.00mm Blue | |
| 0820-10-502B | 2 | STD A/T | |
| ECCENTRIC SHAFT | N3H3-11-D00 | 1 | M/T |
| N3H2-11-D00C | 1 | A/T | |
| COUNTERWEIGHT – REAR | N3Z2-11-52X | 1 | From A/T for use with lightened flywheels |
| ROTOR HOUSINGS | |||
| Front and Rear | N3H1-10-B10C | 2 | |
| SIDE HOUSING | |||
| Front Cover | N3H1-10-500G | 1 | |
| Front side housing MT | N3H3-10-C00 | 1 | MT |
| Center housing MT | N3H3-10-D00A | 1 | MT |
| Rear Side housing MT | N3H3-10-C50 | 1 | MT |
| Front side housing AT | N3H1-10-C00 | 1 | AT |
| Center housing AT | N3H1-10-D00 | 1 | AT |
| Rear Side housing AT | N3H2-10-C50 | 1 | AT |
Back to top